Monday, November 1, 2010

Wiseduino+ kit available for sale

Update July 5, 2015
A redesigned wsduino kit is now available.

Updated Apr 24, 2012
This kit is DISCONTINUED (not available for sale anymore).

If you are looking into building an Arduino-based clock or a system that requires time keeping, this board is for you. Wiseduino+ not only offers an on-board real time clock, but an extremely accurate one, based on the DS3231 chip from Maxim.

Wiseduino+ is fully compatible with Arduino Duemilanove, from both the hardware (shields) and software (Arduino IDE) perspectives.

Since many people dislike (or are not comfortable with) soldering SMDs, the kit comes with the RTC chip DS3231 already soldered. (Note that there is no DS3231 in DIP form available.) All other parts are through-hole. Sockets are provided for the two other ICs (ATmega328 microcontroller and 24LC256 EEPROM).

Wiseduino+ kit contains the following parts:
  • PCB (green), with a (cuttable) prototyping area;
  • ATmega328 microcontroller chip, with 28-pin DIL socket;
  • DS3231 RTC chip, soldered on the board;
  • 24LC256 EEPROM chip, with 16-pin DIL socket;
  • 16MHz crystal;
  • 2 x 22pF capacitors;
  • 2N2222 npn transistor;
  • 4 x 100nF decoupling capacitors;
  • 6 x 10k resistors;
  • 40-pin female header;
  • CR1220 coin battery, with socket;
  • micro power switch;
  • 2-pin polarized power connector with wires attached;
  • clip for 9V-style battery (for use with a battery holder ONLY; NEVER connect to a 9V battery);
  • 6-pin right angle male header, used as FTDI connector.
To assemble the board, use the same (similar) instructions for building Wiseduino.
A partially assembled board is shown in the photo below.



From the software perspective, any sketch developed for Wiseduino should work without changes on Wiseduino+.


Related postings:

7 comments:

  1. Hi,
    Great site. I love the projects you make. I was wondering what the medieval type music you have on your WiseClock youtube video. I really liked it and would love to buy it for my collection. I would prefer if you would email me at:
    majik624 at aol dot com. Thanks in advance.
    Manfred

    ReplyDelete
  2. Thanks.
    Honestly, I don't remember (it's been more than a year). I just selected one track from the youtube list (in "Audio swap"). I noticed that sometimes the track name gets displayed/advertised as you play the video.

    ReplyDelete
  3. Hi, excellent board, just what I was going to make myself, but you've done all the hard yards.
    I wanted to order a couple of the plus models, but when I click through I get a quantity of 1 that I can't update or edit.

    Any means of ordering two ?

    ReplyDelete
  4. mcsporran, thanks for your interest. Buy 2 by ordering twice and I will send you back $3 (in cash or in parts, whatever you choose).

    ReplyDelete
  5. Hi Florin, What would cost an already assembled and tested board? Thank you, Victor

    ReplyDelete
  6. Victor, same price. I am supposed to receive the PCBs next week (Apr 25-30).

    ReplyDelete
  7. Florin, I sent you an email, Victor

    ReplyDelete